S235J2W material machinability,S235J2W properties

S235J2W material machinability,S235J2W properties
S235J2W material machinability,S235J2W properties for long products the P and S content can be 0,005 % higher.The steels shall contain at least one of the following elements: Al total 0,020 %, Nb: 0,010 - 0,065 %, V: 0,01 - 0,14 %, Ti: 0,01 - 0,12 %. If these elements are used in combination, at least one of them shall be present with the minimum content indicated.
S235J2W properties is permissible to exceed the specified values provided that for each increase of 0,001 % N the P max. content will be reduced by 0,005 %; the N content of the product analysis, however, shall not be more than 0,013 %. The steels may show a Ni content of max. 0,70 %. The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document. Above are S235J2W material machinability,S235J2W properties, if you have any question, please contact bebon steel.

BEBON steel can supply weathering resistant steel for S235J2W ,also can supply S355J2WP steel , S355J0WP steel , S355J2G2W steel , Corten-B steel,if you need these ,please contact us.